| Internet-Draft | TWI Reference Architecture | June 2025 |
| Novak, et al. | Expires 26 December 2025 | [Page] |
This document contains a gap analysis that is the output of the Confidential Computing Consortium identifying areas in the IETF WIMSE WG work where the current WIMSE architecture should be extended to accommodate workloads running in Confidential Computing environments. This document outlines high-level requirements for the these extensions and describes a series of use cases.¶
This note is to be removed before publishing as an RFC.¶
Source for this draft and an issue tracker can be found at https://github.com/confidential-computing/twi-wimse.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 26 December 2025.¶
Copyright (c) 2025 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Until recently, there were few scenarios requiring data-in-use protection. This is starting to change. Regulatory bodies worldwide are increasingly requiring data-in-use protection and privacy enhancing technologies. Outside of regulatory requirements, companies are exploring:¶
Multiparty computation¶
Machine learning training & inferencing¶
Addressing the risks of computing in public clouds and high-risk locations¶
Entrusting confidential data to SaaS providers¶
Insider threats, and other reasons for protecting data-in-use¶
Correspondingly, there is an increased push to harmonize management and governance of human and non-human identities. Modern workloads may operate on their own behalf with their own credentials, or as agents on behalf of other entities with delegated credentials. Entities interested in strong assurances around the security of their deployed workloads, for regulatory, contractual or peace of mind reasons, are facing large and challenging tasks of upgrading their existing computing system infrastructure to meet these requirements. Current ways of issuing and managing workload identities, as well as those required for effective protection of data-in-use, are subject to multiple architectural challenges; chief among them:¶
Lack of workload isolation against the hardware and the operating system owners/administrators, as well as peer workload instances¶
Lack of strong binding between a workload credential and the workload instance to which that credential had been issued¶
Lack of verifiable composition of the workload, and inability to associate a credential with a set of decisions leading up to its issuance¶
It is important to highlight that these shortcomings are related: lack of process isolation eases credential exfiltration and leads to credential leakage and reuse.¶
Confidential Computing can close these architectural gaps due to its unique features (i.e., verifiable composition, strong workload isolation) and broad availability (i.e., support by all major hardware vendors). Multiple emerging regulations will mean that customers will be looking to these features and capabilities to satisfy them.¶
Confidential Computing-assisted mechanisms have to align with the emerging Workload Identity solution ecosystem. Correspondingly, the evolution of the Workload Identity ecosystem should remain in alignment with the expectations of the owners and operators of Confidential Computing workloads.
To address this set of requirements, this document defines and elaborates on the concept of Trustworthy Workload Identity (TWI) in the following Sections.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This document uses terms and concepts defined by the WIMSE and RATS architectures, as well as the terms defined by the Trustworthy Workload Identity Special Interest Group at the Confidential Computing Consortium. For a complete glossary, see Section 4 of [RFC9334] , [I-D.draft-ietf-wimse-arch] & [TWISIGCharter].¶
The definitions of terms like Workload Identity, Workload Credential and Workload Provenance match those specified by the TWI SIG Charter [TWISIGCharter].¶
[I-D.draft-ietf-wimse-arch] defines 'Workload' as "an instance of software executing for a specific purpose". Here we restrict that definition to the portions of the deployed software and its configuration that are subject to Remote Attestation.¶
a stable construct around which Relying Parties can form long-lived Workload authorization policies.¶
the definition of Workload Identity is identical to the definition of the same term by [I-D.draft-ietf-wimse-arch]: "a combination of three basic building blocks: trust domain, Workload Identifier and identity credentials.¶
an ephemeral identity document containing the Workload Identifier and a number of additional claims, that can be short-lived or long-lived, and that is used to represent and prove Workload Identity to a Relying Party.¶
a unique linkage between a Workload Credential and the trusted entities (such as a vendor, developer, or issuer) responsible for the production and/or the remote attestation of the corresponding Workload.¶
The following shortcomings were identified by performing a gap analysis of the current WIMSE architecture [I-D.draft-ietf-wimse-arch] against the requirements underlying Trustworthy Workload Identity (TWI). The gap analysis provides the basis for identifying extensions necessary to meet the level of trustworthiness required by Confidential Computing environments.¶
Protection of Credentials at runtime and insufficient Runtime Attestation:¶
Token replay and misuse:¶
Token binding, even if used, is not sufficient unless the secrets underpinning the Workload Credentials are protected from leakage.¶
Lack of verifiable workload composition accessible through Credential Provenance:¶
When a Relying Party receives a Credential, or when an auditor examines a log of decisions by a Relying Party, it is unable to peform additional checks on the security properties of the Workload or the process involved in creating it, beyond the claims communicated inside the Credential.¶
WIMSE defines an architecture for managing Workload Identity in multi-system environments.¶
The WIMSE Architecture explains the core concept of Workload Identity in-line with the concept of identity in the TWI world.¶
WIMSE model has a CA/Credential issuer that is responsible for provisioning identity Credentials to the Workload. TWI requirement is roughly similar in terms of issuing credentials. However, the requirements and policies applied when issuing Credentials vary as described in the Extensions section below.¶
WIMSE Architecture defines Trust Domain, which is the authority that identifies domain within which the identifier is scoped. TWI Architecture is aligned with this basic building block.¶
Trustworthy Workload Identity as detailed in this document proposes the following extensions and changes to the core WIMSE Architecture.¶
Under Confidential Computing, the confidentiality and integrity of a Workload is isolated from the hosting environment and other Workloads. The underlying assumption in the WIMSE architecture that the hosting environment can be fully trusted to establish the identity of a hosted Workload is incompatible with the assumptions of Confidential Computing. Confidential Workloads perform their own Remote Attestation and Workload isolation ensures that the hosting environment cannot interfere with this process.¶
Under Confidential Computing, Remote Attestation plays a fundamental role in assessing the trustworthiness of the Workload and ensuring that the Workload is running on a platform that provides required security guarantees.¶
The Credential Issuer would process the Attestation Results from the Verifier and apply its own Appraisal Policy for Attestation results prior to issuing Credentials.¶
Confidential Workloads may be "Composite", i.e., span Trusted Execution Environments yet share a Workload Credential. The details are to be defined at a later time.¶
Existing fields inside X.509 certificates (e.g., a certificate serial number) or Workload Identity Tokens (e.g., the "jti" claim) can be used to uniquely tie the Workload Credential to the chain of events leading up to its issuance; as a result, no change is necessary.¶
Workload Provenance can be interrogated to receive the metadata pertaining to Workload, as follows:¶
Workload Composition, i.e. a detailed list of components that comprise a Workload. This could be expressed as a Software Bill of Materials expressed in terms of industry standards, like SPDX or CycloneDX <TODO: add references?>.¶
Set of Compliance tests that executed on the Workload.¶
Details of Vendor/SaaS information.¶
The policy for issuing Credentials may demand the information about the Provenance of the Workload. This requries work in two areas (a) Obtaining the Provenance information about the Workload AND (b) Conveying the provenance information inside the Credential.¶
The Workload Provenance can be made available in a transparent manner, which can be audited and verified by independent parties. While it is a policy of the implementation as to how it obtains the Provenance information, the trustworthiness aspect associated with Provenance information can be verified during the runtime trustworthiness assessment of a Workload, through the means of Remote Attestation, at the time of Workload acquiring the Credentials from credential issuer.¶
The Provenance information can be attached to the Workload credentials using a well-defined protocol.¶
Credential Provenance is the metadata pertaining to the Credential issuance itself, binding the:¶
Workload (including Workload Provenance (Section 5.3.1))¶
Verifier (as defined in Section 4.1 of [RFC9334]), including the criteria it applied to the attestation evidence¶
Credential Issuer (including its issuance policies effective at the time)¶
While the Workload Identity remains stable for as long as the Workload properties remain unchanged, a unique Credential Provenance MUST be generated each time a Workload Credential is issued.¶
Creation of a Credential Provenance record SHOULD additionally be recorded in a transparency log (if in use by the solution), to provide discoverability, immutability and non-repudiation by the issuer. The transparency log record MAY be encrypted to prevent disclosure of Personally Identifiable Information (PII) or buisness-critical data.¶
TODO: Issue #27 filed.¶
With TEEs, a Workload’s private keys and sensitive cryptographic operations (such as signing or validating tokens) can be isolated from the hosting environment, reducing the risk of key leakage even if the hosting environment is compromised. (For instance, the WIMSE token — be it a JWT or an X.509 certificate — can be generated and signed within a TEE, ensuring that the proof-of-possession mechanism remains intact.)¶
Strengthening the initial bootstrapping process. A TEE can enable hardware-based Remote Attestation, proving that a Workload is running in a secure, isolated environment. This attestation could be used as an additional factor during Workload Credential provisioning, ensuring that only Workloads running in a TEE and matching the Workload Credential issuer's attestation policies receive valid credentials.¶
For the Credential exchange patterns defined in the WIMSE Credential Exchange draft, Confidential Computing can provide a Trusted Execution Environment in which the exchange logic runs. This ensures that the process of exchanging or re-provisioning credentials is protected against tampering and eavesdropping.¶
Executing the Workload inside a Trusted Execution Environment can lower the risk that runtime attacks (such as memory scraping or side-channel attacks) can expose critical identity or authentication tokens. For example, a Trusted Execution Environment can be used to securely generate and verify proofs of possession that are important within the WIMSE authentication protocol.¶
Not applicable for this draft at this time.¶
TODO¶